home *** CD-ROM | disk | FTP | other *** search
- STOCK CHARTING SYSTEM - RELEASE 2.5
-
- To obtain directions on how to get these programs running, first make sure you
- are in DOS. You should see the prompt A> (or C> if you are on a hard disk).
- Remove your DOS diskette and insert the Stock Charting System diskette in drive
- A. (If you have more than one diskette, insert the STARTUP diskette). Turn
- on your printer and make sure it is ready to print. Most printers have a ready
- light, and it should be on. Then type the following command just as it appears:
-
- COPY A:SMVERS25.DOC LPT1:
-
- and press the ENTER key. Fourteen pages of information will be printed, and
- the output will be paginated with pages numbered.
-
- To get a "snapshot" printout of this screen, first make sure your printer is
- ready and then press a shift key and the PrtSc key simultaneously. The PrtSc
- key on the IBM-PC keyboard is on the second row of keys up from the bottom row,
- near the right-hand side under the ENTER key. On other keyboards it may be in
- a different position. This procedure can be used to obtain a screen printout
- at almost any time, except when the screen contains graphics.
-